Bobcat E50 P0108 Error Code

P0108 Fault Code Meaning :

Manifold Absolute Pressure Sensor Out of Range High

Manifold Pressure Sensor Fault

P0108 Error Code

Manifold Pressure Sensor Fault is the main cause of P0108 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Tip For E50 Model

When the temperature is below -30 C (-20 F), hydrostatic oil must be warmed before starting. The hydrostatic system will not get enough oil at low temperatures and will be damaged. Park the machine in an area where the temperature will be above -18 C (0 F) if possible.