Bobcat E50 M2007 Error Code

M2007 Fault Code Meaning :

Two Speed Solenoid Open Circuit

Two-speed Primary Solenoid Open Circuit

Two Speed Primary Solenoid Open Circuit

Two Speed Primary Open Circuit

M2007 Error Code

Two Speed Primary Open Circuit is the main cause of M2007 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Tip For E50 Model

There is a control lock sensor in the left console which deactivates the hydraulic control levers (joysticks) and the traction drive system when the control console is raised. The console must be in the locked down position for the hydraulic control levers (joysticks) and traction system to operate.

NOTE: If the control lock sensor does not deactivate the control levers and traction system when console is raised, see your Bobcat E50 dealer for service.