Bobcat E50 M0711 Error Code
M0711 Error Code
Hydraulic Oil Temperature Extremely High is the main cause of M0711 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For E50 Model
There is a control lock sensor in the left
console which deactivates the hydraulic
control levers (joysticks) and the traction
drive system when the control console is
raised. The console must be in the locked
down position for the hydraulic control levers
(joysticks) and traction system to operate.
NOTE: If the control lock sensor does not deactivate
the control levers and traction system when
console is raised, see your Bobcat E50 dealer for
service.